SB163 - Hot air intake inspection

Tecnam P2008 Service Bulletins
Post Reply
LUFTY
Site Admin
Posts: 73
Joined: Sun Nov 30, 2014 6:51 pm

SB163 - Hot air intake inspection

Post by LUFTY » Fri Dec 05, 2014 9:48 pm

During an inspection of a P2008 JC, a crack was found on a plate belonging to hot air intake assy (P/N 28-9-8010-000).
Tecnam prescribes to perform a dedicated inspection on the above mentioned part following instructions contained in next pages, within the terms herein reported.
Attachments
SB163 - Hot air intake inspection.pdf
(771.95 KiB) Downloaded 235 times

Post Reply