RG pneumatic system pressure

The Tecnam P2002 Forum

For all discussions on the P2002

(P2002JF, P2002JR, Sierra)
Post Reply
Hyperion
Posts: 1
Joined: Sun Oct 18, 2015 4:13 am

RG pneumatic system pressure

Post by Hyperion » Sun Oct 18, 2015 4:44 am

Originally in my aircraft the air compressor used to cut out at just over 10 bar. Over the next 250 hours I noticed that it gradually climbed to around 12 bar and the pump seemed to working much longer than normal. On investigating the compressor it was found to be worn out and had to be replaced.

The interesting thing is that the compressor is only rated at 150 psi continuous - so 12 bar is really too high.
I have now adjusted my system back to 10 bar.

There are 2 questions here:

Why do Tecnam say the pressure can go to 12 bar (way above the pump rating)?

Why did the cut out setting in my aircraft slowly increase?

Post Reply