SB147 - Exhaust Springs Setup

Tecnam P2008 Service Bulletins
Post Reply
LUFTY
Site Admin
Posts: 73
Joined: Sun Nov 30, 2014 6:51 pm

SB147 - Exhaust Springs Setup

Post by LUFTY » Fri Dec 05, 2014 9:28 pm

Tecnam recommends to the customers to set-up the Exhaust Springs by filling them with High Heat Silicone to provide additional vibrations damping capability (Refer
to Figure 1).
Attachments
SB147 - Exhaust Springs Setup.pdf
(84.35 KiB) Downloaded 250 times

Post Reply