SB152 - Exhaust Springs Safety Wire Installation

Tecnam P2002 Service Bulletins
Post Reply
LUFTY
Site Admin
Posts: 73
Joined: Sun Nov 30, 2014 6:51 pm

SB152 - Exhaust Springs Safety Wire Installation

Post by LUFTY » Fri Dec 05, 2014 9:32 pm

Tecnam recommends to the customers to set-up the Exhaust Springs by installing a Safety wire between each pair of springs in order to prevent their loss (Refer to Figure 1 and 2).
Attachments
SB152 - Exhaust Springs Safety Wire Installation.pdf
(344.67 KiB) Downloaded 249 times

Post Reply